Product Technical
Aluminum-Steel/ Copper Transition Plate
Part No. | Material A | Material B | Thickness (mm) | Length (mm) | Width (mm) |
|---|---|---|---|---|---|
SAL6 | CCSB/Grade A | 6082 | 2~8 | ≤6000 | ≥60+60 |
SAL5 | CCSB/Grade A | 5083 | 2~8 | ≤6000 | ≥60+60 |
CUAL | T2/C11000 | 1060 | 2~8 | ≤6000 | ≥60+60 |
Technical Configuration:
- Material Combinations: Custom orders for dissimilar materials beyond the specified combinations require prior welding procedure qualification.
- Width: Custom widths are available upon request. Widths exceeding 150mm for b1/b2 segments require a one-month lead time.
- If custom Aluminum-Copper plate joints with thickness ≤20mm, maximum width on either side ≤400mm, and length <6000mm.
- Thickness: Butt joints with non-standard thicknesses require a one-month lead time.
- Length: Standard lengths: 3000mm/6000mm. Custom lengths are available.
Aluminum Steel/Copper Pipe Joint
Part No. | Material A | Material B | Thickness (mm) | Pipe diameter (mm) | Length (mm) |
|---|---|---|---|---|---|
SAL6 | 316L | 6061 | 1.5~8 | ≥30 | ≥60+60 |
CUAL | T2/C11000 | 1060 | 1.5~8 | ≤30 | ≥60+60 |
Product Technical
- All parameters including pipe diameter, wall thickness, flange type, and material grade can be tailored to client specifications
- Aluminum-Copper pipe fitting diameter is greater than 30 mm, with a wall thickness ranging from 1 mm to 10 mm.
Aluminum-Titanium Transition Plate
Part No. | Material A | Material B | Thickness (mm) | Length (mm) | Width (mm) |
|---|---|---|---|---|---|
TIAL6 | Ti-6Al-4V | 6082 | 2~8 | ≤6000 | ≥60+60 |
TIAL5 | Ti-6Al-4V | 5083 | 2~8 | ≤6000 | ≥60+60 |
Aluminum Steel Pipe Joint
Part No. | Flange Material | Pipe Material | Thickness (mm) | Pipe diameter (mm) | Length (mm) |
|---|---|---|---|---|---|
SUSAL6 | 316L | 6061 | 1.5~8 | ≥30 | ≥50+50 |
Product Technical
- Custom aluminum-titanium plate joint plates with thickness below 20mm, width less than 400mm on one side, and length less than 6000mm.
- Custom aluminum-titanium corner joints with thickness below 10mm and titanium alloy width not less than 30mm.
Electrolytic Cell Cathode Soft Strip
Part No. | Material A | Material B | Thickness (mm) | Length (mm) | Width (mm) |
|---|---|---|---|---|---|
FEAL | DT4/Armco Iron | 1060 | 2~20 | Coustomizable | Coustomizable |
Custom thickness ≤20 mm with unrestricted width and length dimensions.
