Product
Aluminum-Steel Transition Plate
- Tensile Strength: ≥180MPa (1st Gen), ≥280MPa (2nd Gen)
- Bend Performance: 6t indenter diameter, 90° (1st Gen)/120° (2nd Gen)
- Certification:Third-party process assessment by classification societies
Aluminum-Steel Transition Pipe
- Material Combinations:6061/T6 Aluminium + 316L Stainless Steel
- Vacuum Sealing:Ultra-high vacuum(10^-12 Pa-m³/s, pressure holding leakage rate less than 10 Pa/24h.
- Wall Thickness: 1~10mm, Diameter ≥30mm
Aluminum-Steel pipe Flange
- Eliminate Embrittlement : (no 4000-series filler required)
- Resistance Corrosion : in stainless steel interfaces
- Avoids weld pool solidification defects: (Zero Porosity and Reduces Microcrack.)
Aluminum- Copper Transition Plate / Pipe
- Tensile strength shall be no less than 70% of that of the weaker base metal (aluminum or copper alloy).
- The leakage rate of aluminum-copper pipe joints shall comply with industry standards.
- Measures for potential corrosion protection shall be selected based on specific operational requirements
Aluminum-Titanium Transition Plate
- Al-Ti Dissimilar Metal Joining Applications for commercial, marine, offshore Vessels and Special-Purpose Vehicles.
- Strength ≥110% of the aluminum base metal's fusion-welded strength.
- Galvanic corrosion protection configured as per operational requirements.
Electrolytic Cell Cathode Soft Strip
- The tensile strength is ≥85 MPa at the DT4/1060 interface;
- The tensile strength is ≥85 MPa at 1060/1060 interface.
- Electrical Conductivity Cross-Section: ≥99.8% of base material cross-section.
Click Get The Brochure Landing to Contact us page
